Multi Inverter Tig Electrode Welding Machine

Features:

Smaller medium frequency transformer can be equipped. So it marks
through mobility, compactness, light weight and low consumption.
The specifications on the control panel can all be adjusted continuously. For example
so the input current, current of the crater arc, welding current,
Base current relative duty cycle, current rise and fall time, gas pre and
Post flow, pulse frequency, AC frequency, warm start cycle, arc force and Length etc. When welding, high frequency and high voltage are required for arc ignition,to ensure the success of the ignited arcs

Specifications:

AC / DC TIG 200D features:
- MCU control system, reacts immediately to all changes.
- High frequency and high voltage for arc ignition to ensure the success of the inflamed
Ensuring an arc ensures that the reverse polarity ignition ensures good ignition behavior
with TIG-AC welding.
- Avoid alternating current arcing with special means, even if
If the arc breaks, the HF keeps the arc stable.
- Pedal controls the welding current.
- TIG / DC operation when the tungsten electrode touches the workpiece during welding,
short-circuit current occurs to protect the tungsten.
- Intelligent protection: over voltage, over current, overheating if the above
Problems occur, the warning lamp on the front is on and the
Output current is switched off. It leads to self-protection and extends the useful life cycle.
- Dual purposes: AC inverter TIG / MMA and DC inverter TIG / MMA, excellent
Performance on AL alloy, carbon steel, stainless steel, titanium
Weight: 8.7kg
Cooling Fan Cooled
.Power Source Dimensions H425mm*W152mm*D291mm
Number of phase: 1
Nominal Supply Voltage: 230V+/-15%
Nominal Supply Frequency50/60Hz
Welding Current Range (MMA Mode): 10-170A
Welding Current Range ( TIG Mode): 10-200A
Effective Input Current: 15.4A
Max Input Current: 30.9A
Single phase Generator Req: 10KVA
MMA Wielding output, 40C, 10Min: 170A@25%,26.8V/25A@100%, 23.4V
TIG Wielding output, 40C, 10Min: 200A@ 40% 18V/126A @100%, 15V
Open Circuit Voltage: 60V DC

Packing:

2m Power cable
200 Amp Electrode Holder With 3m
300 Amp Earth Clamp With 3m
TIG Torch WP-17 4m
1.8m Gas Hose
Operating Manual

WARRANTY

We'll refund your money if the item hasn't been delivered within 40 days after purchase. You have 2 weeks to request a refund — until day 60.
Product doesn't match the description? Contact us within 30 days after you receive it!
In case of cancellation, money will be refunded to your account within 3 days.