Lii-pd4, Lii-s6, Lii500s Battery Charger For 18650, 26650, 21700, Lithium Nimh Battery
10 reviews

Features:


New touch control function
Four optional charging currents: 500mA*4/700mA*4/1000mA *4/2000mA*2;
Two discharge currents: 250mA*4/500mA*4
It can charge different batteries of different specifications (18650/26650....../AA/AAA)

This product uses a separate LCD display, charge and discharge mode (MODE), Voltage (V) Current (mA). Time (h). Capacity (mAh) parameters, at a glance


CHARGE, DISCHARGE and TEST modes can work simultaneously; independently set charge/discharge capacity detection/normal capacity detection function


A variety of protection functions: overcharge and over-discharge, short circuit, temperature, 0V voltage activation function, 1.65V-2.2V non-charging function, intelligent identification of bad battery and reverse battery detection protection

With standard 5V/1000 mA USB output function (only valid when AC power is connected)

Parameters:


Input voltage: DC 12V/3.0A
Output voltage:DC 4.2V / DC 1.48V
Lithium battery charging current: 500mA*4 /700mA*4/1000mA *4 2000mA *2
NiMH battery charging current: 500mA*4/700mA*4 /1000mA*4
Rechargeable battery specifications: 26650,21700,18650,18350, 20650,14500, AA, AAA, etc
Discharge current: 250mA / 500mA
USB output: 5V---1000mA
Termination method: intelligent voltage monitoring
Dimensions: 162mm (length) * 100mm (width) * 36mm (height)

Lii-PD4
Specifications and functions:

Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system
Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA),2000mA is fixed only for slot#4
Multi-functional LCD charging display: for charging progress 25% - 50% - 75% -100% , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A
Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)
Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)
Multi-safety protection function of over-charge and over-discharge, short-circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety
Charging  at constant voltage and current

Button and LCD:
Button of Mode(Channel button): there are 4 independent buttons separately for each channel. While power supply is connected and battery inserted 

1) Short click the channel button in 5S to change the battery type. It will start to charge 5 seconds after setting the battery type (3.2V or 3.80V),  1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries (Note: Battery type can be only selective before charging starts.)
2) LCD: While power supply connected, the LCD will light up for 3S:  1) If no battery is inserted, the LCD will display "null" and will be off in the 30S  2) When the battery is inserted and detected, the LCD will show channel number while the battery type image " Li-Ion 3.7V" flashing indicating to set the battery type: this moment if short click the channel button, it can set battery type; if no operation in 5 seconds, it begins by automatic detection(Li-Ion 3.7V or NIMH)  then charging percentage image will flash meaning the start of charging. At the same time, the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display"100%"meanwhile it shows "End" on the LCD right down corner

Cautions:

This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion, 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4

Read this manual before use and pay special attention to the recommended charge current, must avoid charging battery beyond the recommended current limit
If DC input, only 12V 1A is recommended
Mind heating while charging
Remove the charger from the power source after charging complete, and remove the battery from the charger at the same time
For indoor use only
The displaying data only for reference, please refer to professional instrument for more accurate data

Lii-PL4
Precautions:


This charger can handle all cylindrical batteries 3.7V Li-ion, 3.8V IMR, 1.2V Ni-MH / Cd, 3.2VLiFePO4
Read this manual before use and pay special attention to the recommended charging current, needs to be above the recommended current limit
If DC input, only 12V 1A is recommended
Spirit heating during loading
Remove the charger from power source after charging finished, and remove the battery from the charger at the same time
For the interior only
The display data for reference only, please refer to professional instrument for more accurate data


Specification and function:


Multi-power input: AC cable 110-240V 50 / 60Hz (included) / 12V 1A adapter (selective), four independent and microcomputer management system.
Three charging mode (500mAh / 1000mAh / 2000mAh, 2000mAh current mode is fixed only to the fourth slot.
The LED charging indicators: bo

WARRANTY

We'll refund your money if the item hasn't been delivered within 40 days after purchase. You have 2 weeks to request a refund — until day 60.
Product doesn't match the description? Contact us within 30 days after you receive it!
In case of cancellation, money will be refunded to your account within 3 days.