2-axis Sf-2100c Cnc System Cnc Cutting Machine System

 Precautions for use:
 
1. After the package is opened, please check if the system is damaged during transportation. The contents listed on the packing list are consistent with the contents of the box.
 
2. This manual is applicable to the CNC system of SF-2100C-QG cutting machine produced by Beijing Star Peak Control Technology Co., Ltd.
 
3. Please check if the grid voltage is correct. An AC220V isolation transformer is used between the grid and the system to ensure reliable system operation and personnel safety.
 
4. The numerical control system requires the working environment temperature to be 0 °C ~ +40 °C, and the relative humidity is 0-85%.
 
Special protection is required if working in environments with high temperatures, high humidity and corrosive gases.
 
5. The wiring of each part of the CNC system should be correct and the ground wire should be in good contact.
 
6. The CNC system does not allow all the cable plugs on the rear of the chassis to be plugged and unplugged. As a result, the company refuses the warranty.
 
7. The line of the rear output port of the CNC system is not allowed to be short-circuited with other power lines; otherwise, the CNC will be burned.
 
8. In a high dust environment, the whole machine needs to be dustproof, and it is necessary to clean the dust regularly to ensure the cleaning of the CNC system.
 
9. The CNC system should be managed by a dedicated person and the operator should be trained.
 
10. It is not allowed to connect the AC/DC power supply used inside the CNC system to other appliances.
 
11. In case of problems, please contact us. Do not disassemble or modify the system yourself without being familiar with it.
 
12. Maintain the system and machine tool, perform routine maintenance and inspection every shift; perform secondary maintenance once a month; perform primary maintenance every six months.
 
13. The parameters set by the CNC system should be set strictly in accordance with the instructions in this manual or the supplementary instructions at the time of ordering; if the set parameters are outside the specified range, the CNC system will work abnormally or even be damaged.
 
14. The LCD screen of the system is fragile, and the LCD should be protected during use.
 
15. The technical specifications of this system are subject to change without prior notice.
 
16. Note:
 
The USB port output power of the system is very small, and it can only be used by the U disk. It cannot be connected to other USB devices to prevent damage.
 
 
 
System functions
 
SF-2100C-QG cutting machine CNC system is suitable for all kinds of flame / plasma, high pressure water jet, laser cutting machine, widely used in metal processing, advertising, stone and other industries.
 
The system is highly reliable and has the ability to resist plasma interference, lightning strikes and surges.
 
Practical flame/plasma cutting process, automatic corner rotation control and height control control during plasma processing; remote operation with wireless remote control.
 
It has the function of kerf compensation, and whether the compensation in the program is reasonable, and the corresponding report is made for the user to choose;
 
Breakpoint recovery, automatic power-off recovery function, automatic memory breakpoints;
 
Arbitrary selection and selection of perforation point processing functions;
 
It has an epitaxial perforation function for thick plates and a bridging function for thin plates;
 
Back-off, selection, breakpoint recovery, optional perforation position and other functions, greatly facilitate the user's control;
 
Transfer cutting at any time;
 
It adopts a special small line segment processing function, which makes it easy to walk and can be widely used in metal cutting and advertising, wrought iron, etc.
 
A library of 24 graphics (expandable and customizable) containing common basic machining parts;
 
Fully compatible with StarCAM nesting software, compatible with IBE (Germany), FASTCAM and other mainstream nesting software;
 
Chinese and English operation interface conversion, dynamic graphic display, 1 to 8 times of graphic magnification, automatic tracking of moving points, U disk reading program and timely software upgrade.
 
1.2 Technical indicators
 
Processor: using industrial grade ARM processing chip;
 
Display: 7-inch color LCD display;
 
Input\Output: The system provides 16 optically isolated inputs and 16 optically isolated outputs.
 
Number of linkage axes: 2 axes, (can be driven by X-axis bilaterally or Y-axis bilaterally)
 
Maximum speed: not less than 24 m / min;
 
Pulse equivalent: flexible adjustment;
 
Storage space: 4G large user program storage capacity, processing procedures are not limited;
 
Chassis size: 298 × 202 × 65 (mm);
 
Working temperature: 0 ° C ~ +40 ° C; storage temperature : -40 ° C ~ +60 ° C ;
 
Function word definition:
 
N command segment number
 
G preparation function
 
M auxiliary function
 
T tool function (in this system is

WARRANTY

We'll refund your money if the item hasn't been delivered within 40 days after purchase. You have 2 weeks to request a refund — until day 60.
Product doesn't match the description? Contact us within 30 days after you receive it!
In case of cancellation, money will be refunded to your account within 3 days.